GridDen

Gridfinity, made to measure

Storage that fits your drawers to the millimetre.

Design Gridfinity bins, baseplates and lids, check them in 3D and download files ready for your slicer. Everything happens on this page: no account, nothing to install.

Start with a baseplateMake a bin

Exports STL and 3MF, sized for your printer bed.

A 6 × 4 baseplate holding bins of six sizes, one with a lid.

Three generators, one grid

Every part follows the Gridfinity standard (42 mm cells, 7 mm height units), so it works with the bins and plates you already have.

Bins

From 0.5 to 10 units a side, in half steps. They drop into any Gridfinity grid and stack on each other.

  • A compartment planner for any layout
  • Removable dividers you can move later
  • Hole grids for bits, batteries and pens
  • Label text cut into the tab
Open the bins editor →

Baseplates

The grid itself. Give it a cell count or the inside of your drawer and it fills the space.

  • Fit to a drawer, padding where you want it
  • Split to fit your printer, pieces lock together
  • Tiles that join onto any other tile
  • Magnet and screw holes
Open the baseplates editor →

Lids

Covers that sit in a bin's stacking lip and join edge to edge into lids bigger than your printer.

  • Matches any bin, half units too
  • Split to your bed, pieces lock together
  • Pin connectors, so lids join any way round
  • Stackable tops, so bins stack on a closed lid
Open the lids editor →

Only here

Lids and baseplates that join into bigger ones

Cover a whole drawer with one baseplate and one lid, even when the drawer is twice the size of your printer. Split them to your bed and the pieces come out lettered A1, A2, B1…, with joints only where they meet. Or make tiles that lock onto any other tile, whatever their sizes.

  • Split to fit your printer: the fewest pieces, planned to scale before you print
  • Pin connectors: the same socket on every edge, so pieces join any way round
  • Or dovetail, jigsaw and butterfly-key joints, with a fit tolerance you choose
  • Tabs on the left and front, sockets on the right and back: any tile joins any other
Design a lidSplit a baseplate
A1A2A3three bed-sized pieces, pinned into one lid

From idea to print in a minute

  1. 1

    Set the size

    Cells, height and options, or just the inside of your drawer.

  2. 2

    Check it in 3D

    Turn it around, see it assembled or laid out on your print bed.

  3. 3

    Download and print

    One STL, a ZIP of STLs, or every part in a single 3MF. Share the design with a link.

GridDen is free to use. Your designs never leave your device.